Ab Work Outs: TosLink 1 x 2 Optical Audio Splitter Adapter Review

Average Reviews:

(More customer reviews)I was very skeptical when buying this spliiter/switch after seeing so many bad reviews. It worked for me after little trial and error and here is what I found. For all those who complained that these splitters/switches do not work, this is what you need to do to get it right. I bought this splitter from eforcity, so I cannot say about those shipped by other sellers.... It works both ways i.e. as a splitter and as a switch.

1. For it to act as a switch, the critical thing is that only one source needs to be ON. Some sources send signal even when on stand by mode. To check whether it sends out signal, just plug one end of the toslink cable into port of the source(cable box, ps3, etc) and check the other end for red light. when on stand by, the light should not be lit.

2. The second most important thing for this splitter/switch to work is the length of the cables used. I used all 1.5 ft cables and they work perfectly. Earlier I had 3 ft cables coming out of the cable box and ps3 to the splitter and then 1.5 ft cable to the home theater. The ps3 did not work but cable box worked (not consistently though) as the signal attenuated too much by the time it reached the home theater receiver. I am not sure if there is a shorter cable than 1.5 ft and it would be great if you do have them. 1.5 ft cables work fine. I got the 1.5 ft cables from RiteAV.

Finally, the basic test to see if it works is to check for the red light after the connections. Connect in the way shown below and check for the light near the * before connecting to the receiver. Make sure only one source is ON at a time. If you see light and it still does not work after plugging into the receiver then it means that the signal attenuated too much and your receiver cannot pick it.

source 1 -->
...................splitter -->* receiver
source 2 -->

--> = 1.5 ft toslink cable
ignore the dots...

Good luck!.

Click Here to see more reviews about: TosLink 1 x 2 Optical Audio Splitter Adapter

Product Description:
This device allows you to connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television. Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder. Enjoy crisp, clear sound and video on your favorite devices all at once!